Utax CD 1015 Service Manual download pdf (Page 43)

2AV/X

1-3-21

1-3

APS for special paper

Sets whether to use the paper source with the

special paper for auto paper selection and auto

drawer switching.

1. Select “APS for special paper” and press the

enter key.

2. Select “On” or “Off” and press the enter key.

Paper type (1st to 4th)

Selects the type of paper to be loaded in the

drawers.

1. Select “Paper type (1st to 4th)” and press the

enter key.

2. Select the paper type and press the enter key.

Paper type: Plain/Recycled/Letterhead/Color

Note: “3rd” and “4th” are displayed only when

the optional drawer is installed.

Paper type (bypass)

Selects the type of paper to be loaded in the

bypass tray.

1. Select “Paper type (bypass)” and press the

enter key.

2. Select the paper type and press the enter key.

Paper type: Plain/Transparency/Labels/Recycl-

ed/Rough/Letterhead/Color/Envelope/Card-

stock

Copy eject location setting

Selects whether to eject copies to the internal eject

tray, finisher or job separator.

1. Select “Select copy eject mode” (“SELECT

EJECTOR OF COPY”) and press the enter

key.

2. Select the eject location and press the enter

key.

Copy eject location: Copier/Finisher/Job sepa-

rator

Note: This setting item will not be displayed if

neither the optional finisher nor job separator

is installed.

Auto preheat time

Sets the auto preheat time.

1. Select “Auto preheat time” and press the enter

key.

2. Select the setting and press the enter key.

Setting range: 5 to 45 minutes (in 5-minute

increments)

Note: Set the auto preheat time to be shorter

than the auto shutoff time.

Auto shutoff time

Sets the auto shutoff time.

1. Select “Auto shut-off time” and press the enter

key.

2. Select the setting and press the enter key.

Setting range: 15 to 240 minutes (in 15-minute

increments)

Display contrast adjustment

Adjusts the contrast of the LCD.

1. Select “Display contrast adjustment” (“DIS-

PLAY CONTRAST ADJUST.”) and press the

enter key.

2. Enter the setting and press the enter key.

Setting range: 1 to 7

Management code change

Changes the management code.

1. Select “Management code change” and press

the enter key.

2. Enter the 4-digit management code using the

numeric keys and press the enter key.

Silent mode

Selects whether or not to enter silent mode after

copying.

1. Select “Silent Mode” and press the enter key.

2. Select “On” or “Off” and press the enter key.

Auto drawer switching

Sets whether the auto drawer switching function is

available.

1. Select “Automatic drawer switching” and press

the enter key.

2. Select “On” or “Off” and press the enter key.

Counter report

Prints the report on the toner consumption ratio.

1. Select “Counter report” and press the enter

key.

If A4/11" × 8

1

/

2

" paper is present, the list is

automatically printed out. Otherwise, select

the paper source and press the start key.

(8) Language

Switches the language to be displayed on the

touch screen.

1. Select “Language” and press the enter key.

2. Select the display language and press the

enter key.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 295 296

Comments to this Manuals

No comments