Utax DP 700 User Manual download pdf (Page 5)

This chapter details the cable connections for the DP700.

Connection Details

Important Details

Connections

You can only use the DP700 with Newall Spherosyn and Microsyn analogue encoders.

You need to ensure that:

You secure all the cables to prevent the connectors from dropping into hazardous

positions (for example the floor or coolant tray) when you unplug them.

You route all cables to prevent them from being caught on moving parts.

The DP700 is grounded to the machine, using the braided grounding lead provided,

before you turn on the machine supply.

The power has been disconnected, before you connect the encoder(s).

Do not connect this unit directly to the mains supply.

If your Newall encoder has a round 7 pin connector, then you can buy an adaptor cable (part

no. 307-80980). Contact your local Newall supplier for details.

Encoder input connection

1, 2 or 3 according to model

RS232 output

Cabinet equipotential terminal

for grounding to machine

External PSU input

Cable clamp

1 2 3 4 5 6 7 8 9 10 ... 33 34

No comments

Utax DP 700 User Manual Page 5