You use the direction setting to match the DP700 to the actual direction of travel of any axis.
There are two settings for each axis and
Example
If the current setting is and the travel is positive from right to left, changing
the setting to will reverse the direction to measure positive from left to right.
Setting Up The Unit
Radius / Diameter (measure Setup)
Zero Approach Setup
This setting provides a visual indication that one or more axes are approaching zero. It does
this by using the far left LED segment on each axis, as the axis approaches zero each seg-
ment of the '0' lights up in quick succession. Once zero has been reached the '0' in the far left
will be constantly on.
There are two settings for each axis:
Zero Approach Limits
The radius/diameter function allows the operator to display actual (radius) or twice-actual
(diameter) measurements for each axis.
This function is generally used in turning applications, such as the cross travel on a lathe
where you want to display the diameter reading rather than the radius.
There are two settings for each axis:
dia
rad
Radius
Diameter
Press the axis select key next to the ‘X’, ‘Y’ or ‘Z’ axis to cycle through options
off
on
Zero approach on
Zero approach off
Press the axis select key next to the ‘X’, ‘Y’ or ‘Z’ axis to cycle through options
This setting allows you to choose how close to zero the axis needs to be before the zero
approach function takes effect
Press the axis select key next to the ‘X’, ‘Y’ or ‘Z’ axis
5.000
10.000
Display shows
as standard
display shows
Press
then
Example
To change zero approach limits to 5mm
Now when you cross 5mm approaching zero, the feature will be activated.
Press the axis select key next to the ‘X’, ‘Y’ or ‘Z’ axis to cycle through options
Direction of Travel Setup
---i
i---
---i
i---
10
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals