Utax P-C2660DN Specifications download pdf (Page 107)

4-39

Using the Operation Panel

When the Paper Runs Out During Printing

When Paper Feed Mode is set to Fixed, if the paper in the cassette

runs out during printing, Load Cassette 1 is displayed and the printer

stands by. In this event, either replenish the paper in the empty cassette

or use the procedure below to print from another paper source.

1 While Load Cassette 1 is displayed, press  or  repeatedly until

Use alternative? appears.

2 Press  or  repeatedly until the desired paper source and size

appears.

Each time you press  or , another paper cassette or the paper

size that can currently be fed from the MP tray appears.

3 Press [OK]. Printing continues.

Duplex (Duplex printing)

Using the duplexer, you can automatically print on both sides of the paper.

The duplexer is mounted underneath the printer.

Duplex printing is available for the following paper types:

PLAIN

PREPRINTED

BOND

RECYCLED

ROUGH

LETTERHEAD

COLOR

PREPUNCHED

THICK

HIGH QUALITY

Activating the duplexer is done by selecting either short edge or long

edge binding mode.

IMPORTANT Duplex printing for coated paper (COATED) is possible

if the optional paper feeder PF-530 is installed.

Note Duplex printing can be also performed from the MP tray. If

the paper to be fed from the MP tray does not match the paper

size and paper type of the current paper feed source cassette, a

paper jam may occur.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 223 224

No comments

Utax P-C2660DN Specifications Page 107