Utax CD 1015 Service Manual Page 44
- Page / 241
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
2HA/2HB
1-3-12
U034
Adjusting the print start timing
Description
Adjusts the leading edge registration, center line or trailing edge margin.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and original.
Make the adjustment if there is a regular error between the center lines of the copy image and original.
Make the adjustment if there is a regular error between the trailing edges of the copy image and original.
Method
1. Press the start key.
2. Select the item using the image mode selection key.
: Off, : On
Adjustment: leading edge registration adjustment
1. Select group 1 using the image mode selection key.
2. Select the item using the exposure adjustment keys.
3. Press the interrupt key.
4. Press the start key to output a test pattern.
5. Change the setting value using the zoom +/- keys.
For output example 1, decrease the value. For output example 2, increase the value.
Figure 1-3-1
6. Press the start key. The value is set.
Maintenance
item No.
Description
Image mode LEDs
(group No.)
Description
1 Leading edge registration adjustment
2 Center line adjustment
3 Trailing edge margin adjustment
Exposure
indicator
Description Setting
range
Initial
setting
Change in
value per step
Exp. 1 (lit) Paper feed from drawer -5.0 to 10.0 0.9 1.0 mm
Exp. 2 (lit) Paper feed from MP tray -5.0 to 10.0 1.2 1.0 mm
Exp. 3 (lit) Paper feed from optional first
paper feeder
-5.0 to 10.0 1.3 1.0 mm
Exp. 4 (lit) Paper feed from optional second
paper feeder
-5.0 to 10.0 1.3 1.0 mm
Exp. 5 (lit) Paper feed from optional third
paper feeder
-5.0 to 10.0 1.3 1.0 mm
Exp. 1 (flashing) Duplex mode -5.0 to 10.0 1.0 1.0 mm
Correct image Output
example 1
Output
example 2
Leading edge registration
- Service Manual 1
- Digital Copy 1
- Double-pole/neutral fusing 3
- Safety precautions 5
- 1.Installation Precautions 7
- 2.Precautions for Maintenance 8
- 3.Miscellaneous 9
- CONTENTS 11
- 1-5 Assembly and Disassembly 12
- 2-1 Mechanical construction 12
- 2-2 Electrical Parts Layout 13
- 2-3 Operation of the PWBs 13
- 2-4 Appendixes 13
- INSTALLATION GUIDE 13
- 1-1-1 Specifications 15
- °C/71.6°F, 60% RH) 15
- °C/356°F thermostat 15
- 1-1-2 Parts names 17
- 1-1-3 Machine cross section 19
- °C/50 to 90.5°F 21
- ±0.3%/60 Hz ±0.3% 21
- (1) Installation procedure 22
- Toner container release lever 25
- Toner container 25
- Front right cover 27
- Power source PWB 29
- Wire of the drawer heater 29
- 1-3-1 Maintenance mode 33
- Correct image Output 44
- Leading edge registration 44
- Center line of printing 45
- Trailing edge margin 46
- Original Copy 47
- ± 1.5 mm 48
- ± 1.35 mm 48
- Scanner center line 52
- Reference 55
- 1/2" x 14" 56
- 1/2" x 11" 56
- 1/2" x 8 1/2" 56
- 1 2 3 62
- 4 5 6 62
- 7 8 9 62
- 1/2" size 75
- –2.0–2.0 77
- (P.1-3-45) 78
- (P.1-3-47) 78
- (P.1-3-46) 79
- 1/2" sheets 84
- 1-3-2 Copier management 92
- 1-4 Troubleshoo ting 97
- 1-4-2 Self-diagnosis 111
- (15)Image is partly 116
- 1-4-4 Electric problems 122
- 1-4-5 Mechanical problems 125
- 1-5 Assemb ly and Disassembly 127
- 1-5-2 Paper feed section 129
- Separation pulley 130
- Lower paper feed unit 130
- Separation pulley unit 130
- Paper feed clutch 131
- Stop ring 131
- Registration guide 131
- Upper paper feed unit 131
- MP upper cover 134
- MP lower cover 134
- Connector 134
- Paper conveying unit 134
- MP paper feed pulley unit 136
- MP paper feed pulley 136
- MP paper feed 136
- MP separation pad 136
- 1-5-3 Optical section 138
- Scanner wire 141
- Scanner wire drum shaft 141
- Frame securing tool 143
- Mirror 1 frame 143
- Mirror 2 frame 143
- 1-5-4 Drum section 149
- Main charger unit 151
- Main charger 151
- 1-5-5 Developing section 152
- 1-5-6 Transfer section 153
- 1-5-7 Fuser section 154
- Fuser unit 155
- Connectors 155
- Heat roller guide 158
- Fuser left unit 158
- Heat roller separation claws 158
- Heat roller 159
- Heat roller bushing 159
- Fuser thermostat 160
- Fuser thermistor 160
- Jumper switch 163
- DIMM slot 163
- 2-1-1 Paper feed section 165
- 2-1-2 Optical section 167
- 2-1-3 Drum section 171
- 2-1-4 Developing section 172
- 2-1-6 Fuser section 176
- 2-1-8 Duplex section 178
- 2-3-1 Power source PWB 185
- 2-3-2 Main PWB 188
- 2-3-3 Engine PWB 192
- 2-3-4 Operation unit PWB 198
- 2-3-5 CCD PWB 201
- 1/2", two sheets 203
- Maintenance parts list 207
- General wiring diagram 212
- INSTALLATION GUIDE FOR 213
- THE 300-SHEET CASSETTE 213
- THE DOCUMENT PROCESSOR 220
- 15mm15mm 224
- THE DUPLEX UNIT 231
- THE Printing System (X) 239
- Français 240
- Italiano 240
© 2020, manymanuals.com. All rights reserved. | 1.441 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals