Utax CD 1015 Service Manual download pdf (Page 127)

2HA/2HB

1-5-1

1-5 Assemb ly and Disassembly

1-5-1 Precautions for assembly and disassembly

(1) Precautions

Be sure to turn the power switch off and disconnect the power plug before starting disassembly.

When handling PWBs, do not touch connectors with bare hands or damage the board.

Do not touch any PWB containing ICs with bare hands or any object prone to static charge.

Use only the specified parts to replace the fuser unit thermostat. Never substitute electric wires, as the copier may be seri-

ously damaged.

(2) Drum

Note the following when handling or storing the drum.

When removing the drum unit, never expose the drum surface to strong direct light.

Keep the drum at an ambient temperature between -20

°C/-4°F and 55°C/131°F and at a relative humidity not higher than

90% RH. Avoid abrupt changes in temperature and humidity.

Avoid exposure to any substance which is harmful to or may affect the quality of the drum.

Do not touch the drum surface with any object. Should it be touched by hands or stained with oil, clean it.

(3) Toner

Store the toner in a cool, dark place. Avoid direct light and high humidity.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 240 241

No comments

Utax CD 1015 Service Manual Page 127